Front Differential Drive Pinion Gear Bearing Replacement: Removal

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Differential Drive Pinion Gear Bearing

Courtesy of GENERAL MOTORS CORP.

Removal

Callout	Component Name
1	Front Differential Drive Pinion Gear Bearing Tip: When removing the front differential drive pinion gear bearing use J 41816-2: step plate. Use J 8433-1: puller bar or equivalent with bolts 2-3/8 x 3 x 24. Special Tools J 8433-1: Puller Bar or equivalent J 22912-B: Split Plate Bearing Remover or equivalent J 41816-2: Step Plate For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Front Differential Drive Pinion Gear Bearing
Tip:

When removing the front differential drive pinion gear bearing use J 41816-2: step plate.
Use J 8433-1: puller bar or equivalent with bolts 2-3/8 x 3 x 24.

Special Tools

J 8433-1: Puller Bar or equivalent
J 22912-B: Split Plate Bearing Remover or equivalent
J 41816-2: Step Plate

For equivalent regional tools, refer to Special Tools .