4-5-6 Clutch Dam Installation

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of 4-5-6 Clutch Dam

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	4-5-6 Clutch Spring
2	4-5-6 Clutch Piston Fluid Dam Tip: DT 47693-1 which is part of DT-47693: dam protector prevents the dam seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT 47693-1 which is part of DT-47693: dam protector to ease the installation of the dam. Special Tools: DT-47693: Dam Protector For equivalent regional tools, refer to Special Tools .
3	4-5-6 Clutch Dam Retaining Ring Special Tools DT 47693-2 Clutch Spring Compressor which is part of DT-47693: dam protector J 8059: Snap Ring Pliers-Parrallel Jaw or equivalent For equivalent regional tools, refer to Special Tools .

Callout

Component Name

4-5-6 Clutch Spring

4-5-6 Clutch Piston Fluid Dam
Tip: DT 47693-1 which is part of DT-47693: dam protector prevents the dam seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT 47693-1 which is part of DT-47693: dam protector to ease the installation of the dam.
Special Tools:
DT-47693: Dam Protector
For equivalent regional tools, refer to Special Tools .

4-5-6 Clutch Dam Retaining Ring

Special Tools

DT 47693-2 Clutch Spring Compressor which is part of DT-47693: dam protector
J 8059: Snap Ring Pliers-Parrallel Jaw or equivalent

For equivalent regional tools, refer to Special Tools .