LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1913 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Transmission Fluid Cooler Flushing and Flow Test (SA9165T) >> Clean-up

Transmission Fluid Cooler Flushing and Flow Test (SA9165T): Clean-up

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the water supply hose from the SA9165T:  flusher and bleed any remaining air pressure from the flusher tank.
  2. Remove the fill cap from the SA9165T:  flusher and return any unused flushing solution to its container. Rinse the SA9165T:  flusher with water. Do not store the SA9165T:  flusher with flushing solution in it.
  3. After every third use, clean the SA9165T:  flusher as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transmission fluid in accordance with local regulations.