LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1910 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Latch Adjustment >> Adjustment Procedure

Adjustment Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Hood Latch-To-Support Bracket Bolts
    GM749964Courtesy of GENERAL MOTORS CORP.
  1. Loosen the bolts retaining the hood latch to the support bracket.
    2. CAUTION: Refer to Fastener Caution .
  2. Move the hood latch from side to side until the striker enters the center of the latch assembly and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals