Conditions for Setting the DTC
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
B1019 00
- The SDM was programmed with the wrong options for the vehicle.
- The wrong components were installed for the content of the vehicle.
- SDM connector may have bent pins or shorting bars causing the SDM to learn deployment loops that are not actually present.
B1019 3A
- The vehicle was configured for passenger presence system (PPS) but the SDM does not detect that all the PPS indicators are present due to loss of power at indicator, or an open indicator control circuit.
- The vehicle is not configured for PPS and the SDM detects that the PPS indicator is present.