Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Power Seat)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Seat And Passenger Seat Outer Adjuster Finish Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Outer Adjuster Finish Cover Screw CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Seat Outer Adjuster Finish Cover Procedure Release the rear of the adjuster cover first. Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame. Disconnect the power seat switch electrical connector.

Callout

Component Name

Front Seat Outer Adjuster Finish Cover Screw

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Front Seat Outer Adjuster Finish Cover

Procedure

Release the rear of the adjuster cover first.
Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.
Disconnect the power seat switch electrical connector.