LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1887 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Inlet Hose Replacement (L61/LAT) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Heater Hoses & Heater Core
    GM1644878Courtesy of GENERAL MOTORS CORP.
  1. Drain the coolant. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716 Fill) .
  2. Remove the heater inlet hose clamp from the heater core.
  3. Remove the heater inlet hose (2) from the heater core.
    4. Fig 2: Heater Hoses At Engine
    GM1644848Courtesy of GENERAL MOTORS CORP.
  4. Remove the heater inlet hose clamp from the engine.
  5. Remove the heater inlet hose (2) from the engine.
scientia non olet · About LEMON Manuals