Removal Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716 Fill) .
- Remove the heater outlet hose clamp from the heater core.
- Remove the heater outlet hose from the heater core.
- Remove the heater inlet hose clamp from the heater core.
- Remove the heater inlet hose from the heater core.
- Remove the instrument panel retainer. Refer to Instrument Panel Retainer Replacement .
- Remove the shift control bracket. Refer to Shift Control Replacement for the Getrag 5 speed transmission or Floor Shift Control Cable Replacement for the 4T45-E transmission or Shift Select Cable Replacement for the 5AT transmission.
- Remove the heater duct screws.
- Remove the heater duct.
- Remove the heater core cover screws.
- Remove the heater core cover.
- Remove the heater core pipe cover screw.
- Remove the heater core pipe cover.
- Remove the heater core pipe foam seal.
- Grasp the heater core at end tanks and remove heater core. Spray the perimeter of the heater core seal and the heater core pipes at the front of dash with a soap and water mixture to ease removal.