LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1887 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Blower Motor Resistor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Blower Motor Resistor, Screws & Blower Case Assembly
    GM933084Courtesy of GENERAL MOTORS CORP.
  1. Install the blower motor resistor to the HVAC module.
    2. NOTE: Refer to Fastener Notice .
  2. Install the blower motor resistor screws to the HVAC module.

    Tighten:  Tighten the screws to 1 N.m (9 lb in).

  3. Connect the electrical connector to the blower motor resistor.
  4. Install the right side insulator/closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
scientia non olet · About LEMON Manuals