Shift Lever Does Not Operate Smoothly
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Shift Lever Does Not Operate Smoothly
| Condition |
Action |
| DEFINITION: Shift lever does not operate smoothly |
- Transmission range switch inoperative or out of adjustment
- Shift cable broken or out of adjustment
- Joint in the shift cable and the transmission, or in the body, worn
- Internal transaxle concern
|
- Inspect the MIL indicator for loose connectors.
- Inspect the transmission range switch. Replace the transmission range switch if faulty. Adjust the transmission range switch and the shift cable, if not adjusted properly.
- Inspect for a loose shift cable at the shift lever and the transmission control shaft.
- Inspect the manual shift shaft lever and the bearings for binding or improper assembly.
|