LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1878 (Seat Belt System) >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center pillar upper garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement .
    2. Fig 1: Shoulder Belt Height Adjuster
    GM964654Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners from the shoulder belt height adjuster. Remove the height adjuster.
scientia non olet · About LEMON Manuals