DTC P2100: Description

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

This DTC monitors the operation of the throttle actuator control (TAC) motor and control circuitry. The TAC motor is the functional center or the TAC system and in an integral part of the TAC module. The powertrain control module (PCM) receives accelerator pedal position (APP) sensor information and calculates the desired throttle position. The PCM sends this desired throttle position or target value to the TAC module. The TAC module achieves the desired throttle position by commanding the throttle control motor to position the throttle valve at the target value. The TAC module then compares the throttle position (TP) sensor 1 value to the desired value. If necessary, the throttle control motor is moved slightly in order to obtain the exact target value position. The TAC module is not serviced separately and must be replaced with the throttle body assembly. For additional information on the operation of the TAC system refer to Throttle Actuator Control (TAC) System Description .