LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1864 (Engine Cooling System) >> Repair Instructions >> Throttle Body Heater Outer Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Inlet & Outlet Heater Hoses
    GM1237797Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body outlet hose and the hose clamp to the throttle body.
  2. Install the throttle body outlet hose and the hose clamp to the coolant pipe.
  3. Install the throttle body air inlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  4. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill)  or Draining and Filling Cooling System (GE 47716 Fill) .
  5. Inspect for leaks.