LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1864 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (L66) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator Hose
    GM1252561Courtesy of GENERAL MOTORS CORP.
  1. Drain the coolant. Refer to Draining and Filling Cooling System (Static Fill)  or Draining and Filling Cooling System (GE 47716 Fill) .
  2. Remove the radiator inlet hose clamp from the radiator.
  3. Remove the radiator inlet hose from the radiator.
  4. Remove the surge tank inlet hose from the surge tank.
  5. Remove the radiator hose retaining straps from the radiator support.
    6. Fig 2: View Of Radiator Inlet Hose
    GM1252503Courtesy of GENERAL MOTORS CORP.
  6. Remove the radiator inlet hose clamp from the engine.
  7. Remove the radiator inlet hose from the engine.
scientia non olet · About LEMON Manuals