Conditions for Setting the DTC
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
P0101
- The engine control module (ECM) detects that the difference between the measured MAF and the MAF Performance Test is greater than 15 g/s for greater than 0.5 second.
AND
- The ECM detects that the difference between measured MAP and the MAP Performance Test 2 is greater than 20 kPa for greater than 0.5 second.
OR
- The ECM detects that the difference between the measured MAF and the MAF Performance Test is greater than 15 g/s for greater than 0.5 second.
AND
- The ECM detects that the difference between measured MAP and the MAP Performance Test 1 is greater than 20 kPa for greater than 0.5 second.
AND
- The ECM detects that the difference between measured MAP and the MAP Performance Test 2 is greater than 20 kPa for greater than 0.5 second.
P1101
- The ECM detects that the difference between the measured MAF and the MAF Performance Test is greater than 15 g/s for greater than 0.5 second.
AND
- The ECM detects that the difference between measured MAP and the MAP Performance Test 2 is greater than 20 kPa for greater than 0.5 second.
AND
- The ECM detects that the difference between measured TP and the TP Performance Test is greater than 25 g/s and 25 kPa for greater than 0.5 second.
OR
- The ECM detects that the difference between measured MAP and the MAP Performance Test 1 is greater than 20 kPa for greater than 0.5 second.
AND
- The ECM detects that the difference between measured MAP and the MAP Performance Test 2 is greater than 20 kPa for greater than 0.5 second.
AND
- The ECM detects that the difference between measured TP and the TP Performance Test is greater than 25 g/s and 25 kPa for greater than 0.5 second.