Test Description
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
The number below refers to the step number on the diagnostic table.
- 2: If other IPC functions are not working correctly, check for an open fuse or for a lack of power and ground to the IPC.
Malfunction Indicator Lamp (MIL) Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Engine Controls Schematics Connector End View Reference: Powertrain Control Module Connector End Views or Engine Controls Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Observe the instrument panel cluster (IPC) assembly operation. Do all other functions of the IPC function normally? |
Go to Step 3 | Go to SYMPTOMS - DISPLAYS AND GAGES |
| 3 | Replace the IPC. Refer to Instrument Cluster Replacement
. Did you complete the replacement? |
Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |