LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1846 (Hybrid Control System) >> Diagnostic Information and Procedures >> DTC P0A9D, P0A9E, P0AC7, P0AC8, P0ACC, P0ACD, P0AEA, P0AEB, P1A1A, P1A1B, P1A1D, or P1A1E >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Each battery module has a separate temperature sensor, or thermistor. These sensors are serviced as a pair (one pair for each battery cassette). The battery cassette must be removed from the vehicle in order to access the thermistors. These sensors receive power and provide a battery temperature feedback signal to the battery energy control module (BECM), through the generator battery temperature sensor wiring harness.

The battery temperature sensor is a 2-wire 10 kohm thermistor. The BECM supplies 5 volts and a low reference circuit to determine battery temperature.

scientia non olet · About LEMON Manuals