Conditions for Clearing the DTC
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Golden range check fault:
- Current sensor DTCs = PASSED.
- Contactor command = transition to CLOSED.
- Correlation check fault:
- Current sensor DTCs = PASSED.
- Current Sensor 1 and 2 = VALID.
- -30 amps is less than current sensor 1 and is less than 30 amps.
- -350 amps is less than current sensor 2 and is less than 150 amps.
- Polarity check fault:
- Pack current = VALID.
- Pack and module voltages = VALID.
- Current sensor DTCs = PASSED.
- Pack and module DTCs = PASSED.
- Pack current is greater than 50 amps or pack current is less than -50 amps.