LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1843 (Engine Controls And Fuel - 3.5L (L66) - Introduction (2 Of 2)) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left camshaft sprocket. Refer to Camshaft Drive Sprocket Replacement - Left Side .
    2. Fig 1: View Of Camshaft Oil Seal
    GM897130Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt (240), sprocket (241), bolts (242), cover (244) and seal (243).
    3. Fig 2: View Of Bolt & Camshaft Position Sensor
    GM897132Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt (723) and camshaft position (CMP) sensor (700).
scientia non olet · About LEMON Manuals