LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1839 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement (2.2L (L61) and 2.4L (LAT)) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Exhaust Manifold Heat Shield
    GM1631387Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust manifold heat shield (1).
    2. NOTE: Refer to Fastener Notice .
  2. Install the exhaust manifold heat shield studs (2).

    Tighten:  Tighten the studs to 25 N.m (18 lb ft).

scientia non olet · About LEMON Manuals