LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1838 (Engine Controls And Fuel - 2.2L (L61) - Introduction (2 Of 2)) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Engine Coolant Temperature Sensor (L61)
    GM951591Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
    2. IMPORTANT: Engine coolant must be drained below the level of the engine coolant temperature sensor (ECT) sensor. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716 Fill) .
  2. Disconnect the ECT sensor harness connector.
  3. Remove the ECT.
scientia non olet · About LEMON Manuals