LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1836 (Drum Brake System) >> Repair Instructions >> Drum Brake Adjusting Hardware Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Spreading Brake Shoes Apart
    GM142293Courtesy of GENERAL MOTORS CORP.
  1. Use the J 38400  in order to spread the brake shoes (1) apart. See Special Tools .
    2. Fig 2: Identifying Park Brake Adjuster Actuator Components
    GM178990Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the adjuster (2) engages the brake shoes (4 and 5), the park brake actuator (3), and the adjuster actuator (1) properly.
  2. Install the adjuster.
    3. Fig 3: View Of Brake Components
    GM695644Courtesy of GENERAL MOTORS CORP.
  3. Install the adjuster spring (3).
    1. Install the straight end of the adjuster spring into the brake shoe.
    2. Install the hook end of the adjuster spring to the adjuster actuator (1).
  4. Adjust the brake shoes. Refer to Drum Brake Adjustment .
  5. Install the brake drum. Refer to Brake Drum Replacement .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals