LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1834 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Stabilizer Link To Stabilizer Bar Nut
    GM1830224Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Hold the ball shaft secure with a TORX® bit, when removing the nut.
  2. Remove the stabilizer link to stabilizer bar nut.
    3. Fig 2: View Of Stabilizer Bar Clamp & Bolts
    GM930236Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer bar clamp bolts.
  4. Disengage the stabilizer bar from the stabilizer link ball studs, while removing the stabilizer bar from the vehicle.
scientia non olet · About LEMON Manuals