Action Taken When the DTC Sets
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- The control module stores the DTC information into memory when the diagnostic runs and fails.
- The malfunction indicator lamp (MIL) turns ON during the second consecutive drive cycles with the error detected in the ECM.
- The control module records the operating conditions at the time the diagnostic fails. The control module stores this information in the Failure Records.
- The ECM records the operating conditions at the time of turning ON the MIL and stores the data as Freeze Frame information.