Fuel Gage
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
The engine control module (ECM) sends fuel level percent to the body control module (BCM) via the controller area network (CAN) serial data. The instrument panel cluster (IPC) displays the fuel level as determined by the BCM. The fuel gage defaults to E (empty) if:
- The ECM detects a malfunction in the fuel level sensor circuit.
- The IPC detects a loss of class 2 communications with the BCM.
- The BCM detects a loss of CAN communications with the ECM.
When the fuel level is less than a pre-determined value, the Low Fuel indicator message illuminates.