LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1830 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Low/Reverse Servo Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil feed pipes. Refer to Oil Feed Pipes Replacement .
    2. Fig 1: View Of Low/Reverse Servo Assembly
    GM588858Courtesy of GENERAL MOTORS CORP.
  2. Remove the 3 low and reverse band servo cover bolts, the servo and the spring.
  3. Disassemble, clean and inspect the low and reverse servo assembly. Refer to Low and Reverse Servo Disassemble .
scientia non olet · About LEMON Manuals