LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1830 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Fretting Ring, Final Drive Internal Gear Install

Fretting Ring, Final Drive Internal Gear Install

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fretting Ring
    GM20208Courtesy of GENERAL MOTORS CORP.
  1. If the fretting ring (119) has been removed, install the fretting ring (119) into the small groove in the transmission case (51).
    2. IMPORTANT: Install the final drive internal gear in same orientation as observed during removal, inside lip faces up.
  2. Install the final drive internal gear (118) into the transmission case (51).
scientia non olet · About LEMON Manuals