LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1830 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Forward Clutch Support, Low Roller Clutch Install

Forward Clutch Support, Low Roller Clutch Install

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Forward Clutch Support & Low Roller Clutch Assembly
    GM1644742Courtesy of GENERAL MOTORS CORP.
  1. Install the forward clutch support and lo roller clutch assembly (114) into the transmission case. Compress the parking pawl spring, and line up the parking pawl with the parking pawl gear.
    2. Fig 2: Identifying Forward Clutch Support Snap Ring
    GM1644739Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: When installing the forward clutch support snap ring (112), the snap ring opening must be toward the bottom of the transmission case and facing the bottom pan.
  2. Install the forward clutch support snap ring (112) into the transmission case with the ends pointing up. Use a screwdriver in order to set the snap ring into place.
scientia non olet · About LEMON Manuals