LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1830 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Forward Clutch Assembly Installation

Forward Clutch Assembly Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Forward Clutch Assembly
    GM1644735Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Rotate the forward clutch assembly (110) counterclockwise during assembly in order to seat the assembly into the lo roller clutch. When assembled correctly, the forward clutch assembly (110) should not turn clockwise.
  1. Install the forward clutch assembly (110) into the transmission case.
    2. Fig 2: Checking Lo/Reverse Band Installation With A Screwdriver
    GM20251Courtesy of GENERAL MOTORS CORP.
  2. Insert a screwdriver through the reverse servo pin hole in order to verify the correct installation of the lo/reverse band. The screwdriver should compress the band around the forward clutch housing.
scientia non olet · About LEMON Manuals