LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1830 (Automatic Transaxle - 4T45-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Actuator Guide Replacement

Actuator Guide Replacement

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Do not remove the actuator guide unless the actuator guide appears damaged.
    Fig 1: View Of Actuator Guide Components
    GM20215Courtesy of GENERAL MOTORS CORP.
  1. Remove the actuator guide roll pin (810) from the case.
  2. Remove the actuator guide (812) and O-ring seal (811) assembly from the case (51). For easiest removal, tap the actuator guide (812) into the case (51).
  3. Install a new O-ring seal (811) on the actuator guide (812).
  4. Install the actuator guide (812) and O-ring assembly (811) into the transmission case (51).
  5. Install the actuator guide roll pin (810) into the case (51) in order to secure the actuator guide (812).
scientia non olet · About LEMON Manuals