LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Transmission Wiring Harness Extension Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Shift Control Solenoid Valve Electrical Connectors, Transmission Wiring Harness & Bolt
    GM1229877Courtesy of GENERAL MOTORS CORP.
  1. Remove the clutch pressure control solenoid cover. Refer to A/B Clutch Pressure Control Solenoid Assembly Cover Replacement .
  2. Disconnect the shift control solenoid valve electrical connectors, noting proper location.
  3. Remove the transmission wiring harness bolt and harness assembly.
scientia non olet · About LEMON Manuals