LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Fluid Cooler Pipe Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the oil cooler lines from the transmission. Refer to Oil Cooler Line Replacement .
    2. Fig 1: View Of Oil Cooler Pipe Fitting & Seal
    GM1234240Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil cooler pipe fitting and seal.
  3. Discard the seal.
scientia non olet · About LEMON Manuals