LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Transmission Case Front Differential Bearing Race Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Bearing Race Selective Shim, Spacer & Transmission Case
    GM1205917Courtesy of GENERAL MOTORS CORP.
  1. Lubricate all parts with automatic transmission fluid during installation.
  2. Install the bearing race selective shim (910) and the bearing race spacer (909) into the transmission case (31).
  3. Install the tapered rear roller bearing race (908) into the transmission case (31).
    4. Fig 2: Installing The Front Differential Tapered Rear Roller Bearing Race Using DT 46428 & EN 46342
    GM1205918Courtesy of GENERAL MOTORS CORP.
  4. Using the 83 mm side of DT 46428  (1) and EN 46342  (2), install the front differential tapered rear roller bearing race (908) until it bottoms in the transmission case (31). See Special Tools .
scientia non olet · About LEMON Manuals