Transaxle Fluid Level Indicator Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fluid Level Indicator, Tube, O-Ring, Transmission Fluid Fill Tube & Bolt

Courtesy of GENERAL MOTORS CORP.

Install a fluid fill tube O-ring seal (38) onto the transmission fluid fill tube (37).
Install the transmission fluid fill tube (37) into the transmission case.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the M6 x 1.0 x 14 mm transmission fluid fill tube bolt (36).
Tighten: Tighten the bolt to 12 N.m (106 lb in)
Install the fluid level indicator (35) into the fluid level indicator tube (37).