Transaxle Fluid Cooler Pipe Fitting Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transaxle Fluid Cooler Pipe Fitting & Sealing Washers

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Using new transaxle fluid cooler pipe fitting and sealing washers (50), install the transaxle fluid cooler pipe fittings (61).

Tighten: Tighten the fittings to 20 N.m (14 lb ft).