Tools Required

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

DT 46411 6 mm T-Handles. See Special Tools .

Fig 1: Torque Converter Assembly Removed

Courtesy of GENERAL MOTORS CORP.

Using DT 46411 , remove the torque converter assembly (53). See Special Tools .
Inspect the following:
- External damage
- Metal particles found after flushing the oil cooler and lines
- External leaks in the hub wells area
- The torque converter pilot is damaged or fits poorly into the crankshaft
- Internal failure of the stator roller clutch
- Contamination from engine coolant
- Excessive end play