Inspection Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all parts thoroughly and dry them with compressed air. Blow out all passages.
- Inspect the servo valve body for scoring and damage.
- Inspect all valves for wear or damage. If a valve does not operate, refer to General Valve Body Service Instructions .
- Lubricate all parts with automatic transmission fluid during assembly.
CAUTION:
When you use compressed air in order to clear fluid passages and to dry parts, always aim the air pressure away from face and eyes. Always wear adequate eye protection in order to avoid injury from dirt and debris that may adhere to parts.