LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Park/Neutral Position Switch Removal

Park/Neutral Position Switch Removal

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Range Selector Lever, Bolt, Spring Washer, Lock Washer, Nut & Link Cover
    GM1203352Courtesy of GENERAL MOTORS CORP.
  1. Remove the range selector lever position switch shield bolt (64) and the range selector lever link cover (63).
  2. Bend the locking tab on the range selector lever washer (47) from the range selector lever nut (49).
  3. Remove the range selector lever nut (49).
  4. Remove the lock washer (47) and the spring washer (48).
  5. Remove the range selector lever (45).
    6. Fig 2: Park/Neutral Position Switch, Manual Shift Shaft & Lock Washer
    GM1203354Courtesy of GENERAL MOTORS CORP.
  6. Bend the lock tabs of the park/neutral position switch washer (43).
  7. Using an adjustable wrench, hold the manual shift shaft (932) and remove the park/neutral position (PNP) switch nut (46).
  8. Remove the washer (43).
    9. Fig 3: Park/Neutral Position Switch & Control Shaft Hole
    GM1203355Courtesy of GENERAL MOTORS CORP.
  9. Remove the 2 PNP switch bolts (44).
  10. Remove the PNP switch assembly (42) from the transmission case (31).
scientia non olet · About LEMON Manuals