Input and Output Speed Sensor Installation
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install a speed sensor O-ring seal (27) on the input speed sensor (28) and an O-ring seal (27) on the output speed sensor (30).
- Install each speed sensor into the correct transmission case borehole.
- Install the speed sensor M6 x 1.0 x 18 mm bolt (29) and (32).
Tighten: Tighten the bolts to 12 N.m (8.7 lb ft).