LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Front Differential Assembly Overhaul >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Differential, Carrier Bolts & Ring Gear
    GM1205913Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ring gear mounting bolts are left-handed thread.
  1. Mark the location of the gears to the differential assembly.
  2. Remove the 12 front differential carrier bolts (906) from the front differential assembly (904).
  3. Remove the transfer case drive ring gear (903), AWD only, from the front differential assembly (904).
  4. Remove the driven ring gear (905) from the front differential assembly (904).
scientia non olet · About LEMON Manuals