LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Fluid Pipes Installation

Fluid Pipes Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Clutch Apply Fluid Pipe & Transmission Fluid Cooler Pipe
    GM1203365Courtesy of GENERAL MOTORS CORP.
  1. Install a 8 x 57.5 mm 3rd clutch apply fluid pipe (140) into the torque converter housing.
  2. Install a 10 x 153 mm transmission fluid cooler pipe (141) into the torque converter housing.