LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 3rd and 4th Clutch Fluid Pressure Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Third & Fourth Clutch Fluid Pressure Switch & Components
    GM1632043Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine wiring harness bracket (40) and engine wiring harness bolt (39).
  2. Remove the 4th clutch pressure switch harness (952) from the 4th clutch pressure switch.
  3. Remove the 4th clutch pressure switch (5) and the 4th clutch pressure switch seal (4) from the top of the transmission case (31).
  4. Remove the 3rd clutch pressure switch (25) and the 3rd clutch pressure switch seal (26) from the side of the transmission case (31).
  5. Inspect the fluid pressure switches for damage. Replace the switches if faulty.