LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1829 (Automatic Transmission - 5AT - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> 3rd Clutch Shaft Assembly Installation

3rd Clutch Shaft Assembly Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Selective Washer & 3rd Clutch Shaft Assembly
    GM1347190Courtesy of GENERAL MOTORS CORP.
  1. Install the 3rd clutch shaft assembly (830) into the torque converter housing assembly (150).
  2. Install the correct predetermined 3rd clutch shaft, installed height, selective 26.5 mm washer (809) on the machined end of the 3rd clutch shaft assembly (830).
scientia non olet · About LEMON Manuals