LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1828 (Manual Transmission - GETRAG 5 Speed) >> Repair Instructions >> Transmission Control Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transaxle Control Bracket And Bolts
    GM944383Courtesy of GENERAL MOTORS CORP.
  1. Install the transaxle control bracket.
  2. NOTE: Refer to Fastener Notice .
  3. Install the transaxle control bracket bolts.

    Tighten:  Tighten the transaxle control bracket bolts to 25 N.m (18 lb ft).

  4. Install the control assembly. Refer to Shift Control Replacement .