Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Sealant To Rear Cover

Courtesy of GENERAL MOTORS CORP.

Install sealant Saturn P/N 21019581 to the rear cover.

Fig 2: View Of Rear Cover

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The oil guide only installs in one direction. Ensure the oil guide is completely seated in the gear shafts.

Install the oil guide.

NOTE: Refer to Fastener Notice .

Install the rear cover.
Tighten: Tighten the rear cover bolts to 25 N.m (18 lb ft).
Install the left front wheel. Refer to Tire and Wheel Removal and Installation .