LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1828 (Manual Transmission - GETRAG 5 Speed) >> Repair Instructions >> Axle Shaft Oil Seal Replacement (Right) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Axle Seal & SA9133T
    GM1159282Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the intermediate drive shaft. Refer to Intermediate Shaft Replacement (L61) or Intermediate Shaft Replacement (L66) .
  4. Using the SA9113T  , remove the axle seal.