Crankshaft Bearings Selection Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Crankshaft Bearings Selection Specifications
| *Crankshaft Main Journal | **Engine Block Main Journal Bore | |||
|---|---|---|---|---|
| A or I | B or II | C or III | D or IIII | |
| 1 or I | Red/Pink | Pink | Pink/Yellow | Yellow |
| 2 or II | Pink | Pink/Yellow | Yellow | Yellow/Green |
| 3 or III | Pink/Yellow | Yellow | Yellow/Green | Green |
| 4 or IIII | Yellow | Yellow/Green | Green | Green/Brown |
| 5 or IIIII | Yellow/Green | Green | Green/Brown | Brown |
| 6 or IIIIII | Green | Green/Brown | Brown | Brown/Black |
|
IMPORTANT:
The color code is on the edge of the bearing. When using bearing halves of different colors, it does not matter which color is used in the top or bottom position. *As the numbers increase, the crankshaft journal diameter decreases and the bearing thickness increases.**As the letters or numbers increase, the main journal bore diameter increases and the bearing thickness increases. |
||||