Connecting Rod Bearings Selection Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Connecting Rod Bearings Selection Specifications
| *Crankshaft Connecting Rod Journal | **Connecting Rod Journal Bore | |||
|---|---|---|---|---|
| 1 or I | 2 or II | 3 or III | 4 or IIII | |
| A or I | Pink | Pink/Yellow | Yellow | Yellow/Green |
| B or II | Pink/Yellow | Yellow | Yellow/Green | Green |
| C or III | Yellow | Yellow/Green | Green | Green/Brown |
| D or IIII | Yellow/Green | Green | Green/Brown | Brown |
| E or IIIII | Green | Green/Brown | Brown | Brown/Black |
| F or IIIIII | Green/Brown | Brown | Brown/Black | Black |
|
IMPORTANT:
The color code is on the edge of the bearing. When using bearing halves of different colors, it does not matter which color is used in the top or bottom position. *As the letters or numbers increase, the crankshaft journal diameter decreases and the bearing thickness increases.**As the numbers increase, the connecting rod bore diameter increases and the bearing thickness increases. |
||||