Water Pump Installation

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Water Pump

Courtesy of GENERAL MOTORS CORP.

Inspect and clean the O-ring groove and mating surfaces.
Install the pins (302).
Install the water pump (300) with NEW O-ring seal (303).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts (301).
Tighten: Tighten the bolts to 12 N.m (106 lb in).