Tools Required

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

EN 46337 Camshaft Sprocket/Crankshaft Balancer Holder. See Special Tools .

Fig 1: View Of Camshaft Sprocket

Courtesy of GENERAL MOTORS CORP.

Use the EN 46337 in order to retain the camshaft sprocket. See Special Tools .

Fig 2: View Of Camshaft Oil Seal

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (240), sprocket (241), bolts (242), cover (244) and seal (243).

Fig 3: View Of Bolt & Camshaft Position Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (723) and camshaft position (CMP) sensor (700).

Fig 4: Identifying Rear Camshaft Cap, Bolts, O-Ring, Cam & Seal

Courtesy of GENERAL MOTORS CORP.

Remove the bolts (212), cap (211), O-ring (210) and camshaft (209).
Remove the seal (223).